#supports
-
How to Add Supports to Resin Prints: Placement and Settings
Where resin supports go and why: tilt angle, islands, auto versus manual placement, tip size and depth, with Chitubox, Lychee and PrusaSlicer values.
-
Resin Print Layer Separation: Causes and Fixes
A troubleshooting guide to resin print layer separation, with checks for exposure, temperature, peel force, supports, hardware, and post-cure cracks.
-
Resin Print Not Sticking to Build Plate: 7 Fixes
Why resin prints stick to the release film instead of the build plate, how to tell the failure modes apart, and the seven fixes that resolve most of them.