🔬 SLA Precision Lab Tool
SLA Resin Exposure & UV Cure Calibrator
Fine-tune normal layer exposure times, bottom burn-in layer counts, and UV wash/cure station cycles based on your printer LCD type, layer height, and resin formula.
🧪 Printer & Resin Parameters
50 μm
Environmental Variables
Recommended printing temperature is 22°C - 28°C.
Normal Exposure Time
2.5 s
Per Layer
Bottom Layer Exposure
25.0 s
5 Bottom Layers
Post-Cure Time
4 min
UV Chamber Cycle
📊 Recommended Slicer Settings ChituBox / Lychee Profile
Slicer Setting Calibrated Value
Normal Exposure Time 2.5 s
Bottom Exposure Time 25.0 s
Bottom Layer Count 5 Layers
Z Lift Distance / Speed 6 mm @ 65 mm/min
IPA Wash Tank Time 3.5 Minutes
💡 Resin Printing Guidelines
- Always print a 20mm R_E_R_F calibration matrix when switching resin brands.
- Maintain resin temperature above 20°C to prevent layer delamination and high viscosity failure.