Troubleshooting
-
How to Clean Resin Prints Without Sticky or White Residue
Two baths of 95%+ IPA, a soft brush, flushed drain holes and a full dry before UV. Plus how to fix resin prints that stay tacky or turn cloudy.
-
Resin Print Layer Separation: Causes and Fixes
Diagnose resin print layer separation during a print: check normal exposure, resin temperature, cross-section changes, supports, pauses and hardware.
-
Resin Print Not Sticking to Build Plate: 7 Fixes
Why resin prints stick to the release film instead of the build plate, how to tell the failure modes apart, and the seven fixes that resolve most of them.